[CITE-Forum] WMS 1.3

Luis Bermudez lbermudez at opengeospatial.org
Thu Dec 11 16:16:19 EST 2014


Hi Nathan


On Dec 11, 2014, at 3:49 PM, Nathan Kannan <nkannan at prostarcorp.com> wrote:

> Thanks for the feedback Luis,
>  
> We do not have any parent layer associated to all layers under "cite" workspace. However, I see that there is some error associated with the CRS. All the layers are in EPSG:4326. I'll investigate further and rerun the test.
> 

OK.
 
>  
> Also can we use the same data set for running wms 1.1.1 test?
> 

If you go to this page
http://cite.opengeospatial.org/teamengine/

And click on the revision link: http://cite.opengeospatial.org/teamengine/about/wms/1.1.1/site/
You will get details about the data
http://cite.opengeospatial.org/teamengine/about/wms/1.1.1/site/Web_Map_Server.html#B.-Test_Data_Definition

The WMS 1.3 test data is build on the WMS 1.1 test data.  The WMS 1.3 test data has more layers than the WMS 1.3 test data.



- Luis

---------------------------------------------------
Luis Bermudez, Ph.D.
Director Compliance Program
Open Geospatial Consortium (OGC)
The OGC: Making Location Count

Skype: bermudez_luis
Twitter: @berdez
Tel: +1 301 760 7323
http://www.opengeospatial.org/ogc/organization/staff/lbermudez




>  
> Thanks again,
> Best,
> Nathan
> From: Luis Bermudez [lbermudez at opengeospatial.org]
> Sent: Thursday, December 11, 2014 3:14 PM
> To: Nathan Kannan
> Cc: cite-forum at lists.opengeospatial.org
> Subject: Re: [CITE-Forum] WMS 1.3
> 
> Hi Nathan
> 
> For the WMS 1.3 server, this is the request the test engine is making:
> http://dev.prostarcorp.com:8080/geoserver/cite/ows?SERVICE=WMS&&HeIgHt=200&LaYeRs=Autos&CrS=AUTO%3A42001&BbOx=0,0,1,1&StYlEs=&ReQuEsT=GetMap&WiDtH=200&VeRsIoN=1.3.0&FoRmAt=image%2Fpng
> 
> This is the response form your server:
> <?xml version="1.0" encoding="UTF-8"?><ServiceExceptionReport version="1.3.0" xmlns="http://www.opengis.net/ogc" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.opengis.net/ogc http://dev.prostarcorp.com:8080/geoserver/schemas/wms/1.3.0/exceptions_1_3_0.xsd">   <ServiceException code="InvalidCRS">
>       Error occurred decoding the espg code AUTO:42001
> No code "AUTO:42001" from authority "AUTO" found for object of type "ProjectedCRS".
> </ServiceException></ServiceExceptionReport>
> 
> Assertion: When a GetMap request contains a single layer and a CRS where the CRS is inherited from a parent layer in the capabilities document, then the response is valid.
> ---
> 1) You have defined a  parent layer that defines CRSs:
> 
> <CRS>AUTO:42001</CRS>
> <CRS>AUTO:42002</CRS>
> <CRS>AUTO:42003</CRS>
> <CRS>AUTO:42004</CRS>
> <CRS>EPSG:WGS84(DD)</CRS>
> <CRS>EPSG:2000</CRS>
> <CRS>EPSG:2001</CRS>
> <CRS>EPSG:2002</CRS>
> <CRS>EPSG:2003</CRS>
> ....
> 
> 2) In the GetCapabilities you have sublayers of that layer: Autos, BasicPolygons etc..
> 
> 3) The test engine is making a request to check if a sublayer can be requested with a CRS from its parent, but your server is returning an error. The server should return an image with the parent CRS.
> 
> 
> 
> 
> - Luis
> 
> ---------------------------------------------------
> Luis Bermudez, Ph.D.
> Director Compliance Program
> Open Geospatial Consortium (OGC)
> The OGC: Making Location Count
> 
> Skype: bermudez_luis
> Twitter: @berdez
> Tel: +1 301 760 7323
> http://www.opengeospatial.org/ogc/organization/staff/lbermudez
> 
> 
> 
> 
> On Dec 11, 2014, at 2:46 PM, Nathan Kannan <nkannan at prostarcorp.com> wrote:
> 
>> Thanks Luis for the quick response.
>> 
>>  
>> It was our security protocols that was blocking from accessing. We made "cite" work space for role anonymous access. We have all the layers loaded to the "cite" workspace (data downloaded directly from http://cite.opengeospatial.org/teamengine/about/wms/1.3.0/site/). I reran the test with the below url and it passes all criteria for WMS 1.3.0 but for one.However we still see failures for WMS 1.1.1.  (I presume we can use the same data set for 1.3.0 and 1.1.0 because the documentation shows both having the same layers).
>> 
>>  
>> If you can verify and validate this with our below url, it would be very helpful.
>> 
>>  
>> http://dev.prostarcorp.com:8080/geoserver/cite/wms?SERVICE=WMS&REQUEST=GetCapabilities&VERSION=1.3.0
>> 
>>  
>> Thanks & Regards.
>> -Nathan
>> 
>> 
>> From: Luis Bermudez [lbermudez at opengeospatial.org]
>> Sent: Thursday, December 11, 2014 12:24 PM
>> To: Nathan Kannan
>> Cc: cite-forum at lists.opengeospatial.org
>> Subject: Re: [CITE-Forum] WMS 1.3
>> 
>> Hi Nathan
>> 
>>> http://dev.prostarcorp.com:8080/geoserver/cite/wms?SERVICE=WMS&REQUEST=GetCapabilities&VERSION=1.3.0
>> 
>> I cannot access your server. I Get status 404.
>> 
>>> http://dev.prostarcorp.com:8080/geoserver/wms?SERVICE=WMS&REQUEST=GetCapabilities&VERSION=1.3.0
>> Have you go through this page:
>> http://cite.opengeospatial.org/teamengine/about/wms/1.3.0/site/
>> I don't see in the GetCapabilities response any layers advertised that match the required layers
>> Have you uploaded the required data?
>> 
>> 
>> See for example this URL
>> http://cite.lat-lon.de/deegree-webservices-3.3.6-2/services/wms?service=WMS&version=1.3.0&request=GetCapabilities
>> 
>> 
>> - Luis
>> 
>> ---------------------------------------------------
>> Luis Bermudez, Ph.D.
>> Director Compliance Program
>> Open Geospatial Consortium (OGC)
>> The OGC: Making Location Count
>> 
>> Skype: bermudez_luis
>> Twitter: @berdez
>> Tel: +1 301 760 7323
>> http://www.opengeospatial.org/ogc/organization/staff/lbermudez
>> 
>> 
>> 
>> 
>> On Dec 11, 2014, at 10:53 AM, Nathan Kannan <nkannan at prostarcorp.com> wrote:
>> 
>>> Hello Luis,
>>> 
>>>  
>>> As per your suggestion and request for details of our test results, I've listed our url end point for WMS GetCapabilities: (both end points should work, one is directed via "cite" work space and another is generic one)
>>> http://dev.prostarcorp.com:8080/geoserver/cite/wms?SERVICE=WMS&REQUEST=GetCapabilities&VERSION=1.3.0
>>> http://dev.prostarcorp.com:8080/geoserver/wms?SERVICE=WMS&REQUEST=GetCapabilities&VERSION=1.3.0
>>> Also the details of the test failure summary can be found at http://cite.opengeospatial.org/teamengine/ ( we performed 2 tests for WMS (1.1.1 amd 1.3.0), with the only change to the url end point being the wms protocol "version")
>>> 
>>> 
>>>  
>>> Any input to help us complete these tests successfully  is greatly appreciated
>>>  
>>> Regards,
>>>  
>>> Nathan
>>> Prostar Geocorp. Inc.
>>> Sr. Director Geospatial Solutions
>>> 614-352-1926
>>> _______________________________________________
>>> CITE-Forum mailing list
>>> CITE-Forum at lists.opengeospatial.org
>>> https://lists.opengeospatial.org/mailman/listinfo/cite-forum
>> 
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opengeospatial.org/pipermail/cite-forum/attachments/20141211/69d40c81/attachment-0001.html>


More information about the CITE-Forum mailing list